SNH940R46U12.1W21水泥厂油罐供油泵
SN三螺杆泵 SNH三螺杆泵 系统润滑泵 供油泵 卸油泵 装船卸船泵
**技术介绍、讲解SN系列润滑三螺杆泵装置，**使用操作和产品维护简介、用于大型液压设备、输送设备等一系列液压、润滑、冷却系统上。
一、特点 A, characteristics
SN三螺杆泵 SN three screw pump
1.转子液压平衡，振动小，噪音低。 1. The rotor hydraulic balance, little vibration, low noise.
2.输出稳定，无脉动。 2. Stable output, no pulse.
3.**率。 3. High efficiency.
4.具有很强的自吸能力。 4. Has the very strong self-priming capacity.
5.零部件采用通用性强的系列 化设计，具有多种安装方式。
5. Par ts of the strong **monality series design, h**e a variety of installation.
6.结构紧凑，体积小，重量轻，可在较高转速下工作。
6. **pact structure, small volume, light weight, can be in high speed.
二、输送介质种类 Second, transport medium type
a. 润滑性液体：如机械油，滑油，重油，渣油
A. lubricity liquid: such as Ji**eYou, lub oil, he**y oil, residue
b. 低润滑性液体：如轻**，重**，含蜡稀油
B. low lubricity liquid: such as light diesel oil, he**y diesel, of wax thin oil
c. 粘性液体：如各种合成橡胶液和人造胶液，乳化液
C. viscous liquid: such as all kinds of synthetic rubber fluid and artificial glue, emulsion
三、应用 Three, appli**ion
·在供热设备中用做燃油，燃油供应和输送泵。·
in heating equipment to be used for fuel, fuel supply and pump.
·在机械工业中用做液压，润滑和摇控马达泵。
· in **hinery industry used for hydraulic, lubri**ion and remote co**ol motor pump.
·在化学**化工和食品工业中用做装载，输送和供液泵。
· in chemical petroleum chemical engineering and the food industry to be used for loading, transportation and for pump.
·在船舶上用做输送、增压、燃油喷射和润滑油泵以及船用液压装置泵。
· on the vessel, conveying, used for boosting fuel ** and lubri**ion oil pump, and Marine hydraulic pump dev**.
SN系列三螺杆泵
**中低压润滑系统用泵、**用于液压系统润滑、循环、冷却、倒灌、供卸，解决了一系列应用工况要求、无脉动、超大流量、中低压输送**应用。
Low pressure lubri**ion system in the world with pump, widely used in hydraulic system lubri**ion, circulation, cooling, flowing, for discharge, so**e a series of appli**ion condition requirements, no pulse, big flow, low voltage transmission in a wide range of appli**ions.
SN系列性能简介
工作流量： Q 20-9400 L/MIN
工作压力范围： BA 0-4.0 MPa
允许粘度范围： V 0-750 CST
承受工作温度： T 150 ℃
转 速 范 围： N 950/1450/2900 r/min
SN系列三螺杆泵输送流体
一般液压技术输送泵：**、**、润滑油、燃料油、润滑油**、液体燃料油、**、溶剂油、摩擦油、磨损油、内燃机润滑油 、齿轮油、液压油、汽轮机油、压缩机油、冷冻机油、电器**缘油、**损耗系统用油、润滑脂的性质及应用、润滑脂输送、润滑脂的性质、润滑脂的工业输送、特种液、制动液、汽车防冻液、减震器油、油品在储存中的质量管理、液体燃料在储存中的质量管理、润滑油在储存中的质量管理、润滑脂在储存中的质量管理、特种液在储存中的质量管理、油料等。
General hydraulic technology pump: oil, crude oil, lubri**ing oil, **, lubri**ing oil additives, liquid **, diesel oil, so**ent oil, oil, oil, wear friction of internal **bustion engine oil, gear oil, hydraulic oil, turbine oil, **pression oil, oil, electrical insulation frozen oil, and the loss of oil, grease, system properties and appli**ion, grease, grease, conveying, the nature of the industry, grease, conveying, special liquid, brake fluid, automobile antifreeze, shock absorber oil, oil products stored in the quality management, liquid fuel stored in the quality management in the storage, lubri**ing oil, grease, the quality management of quality co**ol in the storage, special liquid in the quality management, oil storage, etc.
SN系列三螺杆泵**优点：SN series screw pump ten big three advantages:
（1）压力和流量范围宽阔，流量范围0.2～320m3/h工作压力可达4MPa；
(1) the pressure and flow range wide, flow range ~ m3 / h the highest wo**ng pressure can reach four MPa;
（2）运送液体的种类和粘度范围宽广,粘度范围3mm2/s-760mm2/s；
(2) shipping and type of liquid viscosity scope is broad, viscosity range 3 was the/s-was the/s;
（3）因为三螺杆泵内的回转部件惯性力较低，故可使用很高的转速；
(3) because the rotary screw pump parts within three inertial force is low, it can be very high speed use;
（4）吸入性能好，具有很强的自吸能力；
(4) aspiration can good, has the very strong self-priming capacity;
（5）流量均匀连续，振动小，噪音低，几乎没有脉动；
(5) flow evenly continuous, little vibration, low noise, almost no pulse;
（6）三螺杆泵结构坚实，安装方便有(卧式、立式、法兰式、插装式）保养容易；
(6) three solid screw pump structure, convenient installation (horizontal, vertical, flange, cartridge type) easy maintenance;
（7）三螺杆泵具有很强的耐热性，一般工作温度是（1~250°C)超过此温度要在订货时说明，我们将为您定做您所需要的产品；
(7) three screw pump has the very strong heat resistance, general wo**ng temperature is (1 ~ ° C) more than the temperature in ordering, we will be made for you the products you need;
（8）根据所输送介质需要还可提供加热或冷却结构；
(8) according to transport medium need can also offer the heating or cooling structure;
（9）三螺杆泵几乎没有磨损，三螺杆泵只要选型正确，使用的寿命是很长的。
(9) three screw pump almost no wear, screw pump selection right as long as three, the use of life is very long.
（10）三螺杆泵的工作效率高。
(10) three screw pump
SN系列三螺杆泵主要安装方式： SN series screw pump three main installation:
SNH 卧式底座式安装三螺杆泵 SNH horizontal base type screw pump installation three
SNF 法兰支架式安装三螺杆泵 SNF flange scaffolding installation of screw pump three
SNS 立式注脚是安装三螺杆泵 SNS vertical footnote is installation of screw pump three
SNJ 油箱浸没式安装三螺杆泵 SNJ tank submerged style installation of screw pump three
SN三螺杆泵 SNH三螺杆泵 系统润滑泵 供油泵 卸油泵 装船卸船泵
南京艾科泵业有限公司
联系人：张 掖
电 话：18751873627 13965524570 025-66079152
传 真：025-85350284 85385832
Q Q：774750678
邮 箱：njakby05**163**
网 址：**:****njakby**
